• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Parts needed for Gen V swap



Yes there are two bolts you'll need. They're longer than the GenIII bolts... Hit up a pull-a-part yard and just take them, lol.
 
I'm doing the swap for a friend and wanted to know what all i needed before i just started in on it and couldn't finish same day. Thanks fry you've been very helpful today.
 
There's a really good write up floating around somewhere. It's pretty straight forward though. I actually cut a GenIII lim with an angle grinder without even taking it off the car. If you go that route just make sure you pack the LIM with rags or paper towels to make sure you don't get aluminum everywhere.
 
You must log in or register to reply here.
Back
Top