• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Odd question, not sure if anyone here will know.

SnowTh1ef

SnowTh1ef

New member
So I have an (originally) N/A L36 in my 2000 bonneville that is now topswapped running a pnp gen 3 blower, and e85 on a 3.8 pulley, looking to get some more mods done so I can get down to a smaller pulley... but... almost no one makes headers for the bonnie :th_tongue2: and those that do are quite expensive new, and hard to find used :mad: So basically just curious if anyone here had experience with headers in a bonnie and maybe how much modification would have to be done for GP headers to fit in my bonneville? Thanks!! Hope GP headers will fit with a little bit of modifications.. haha
 


You have bigger injectors for that e85 right?


And to my knowledge the cheap ebay SD headers fit the bonneville but some modidication is needed if I remember right. I thought someone did it recently but I forget who.
 
Awesome. Excited to make my sle pretty scary! I'll keep you guys updated, you're much more helpful than the guys at the bonnie forums
 
Well lets just say my dd is a 2006 wrx thats 337 awhp and 386 awtq... and I run low 11s on street tires. And the bonneville will eventually be in the same neighborhood if I get my way. Haha
 


SnowTh1ef said:
Well lets just say my dd is a 2006 wrx thats 337 awhp and 386 awtq... and I run low 11s on street tires. And the bonneville will eventually be in the same neighborhood if I get my way. Haha
Click to expand...

with a turbo on the bonne you'll make much more power than the wrx for way cheaper.

it'll still be slower, though.
 


I do still need your top swap grimsin. Different project, long story haha. And yeah eventually going to turbo it.
 
The headers fit. The only modification you have to make is connecting to the exhaust under the car. Because there isn't the same catback flange. That's all.







 


You must log in or register to reply here.
Back
Top