rocafella2032
New member
im going to paint some things...need help remoing the lower peice of the dash where the shifer is, and the window switches..
how do i remove them?
how do i remove them?
Need help removing interior pieces
- Thread starter rocafella2032
- Start date
TheOtherNick
The mod from over yonder
Open the center consul and open the cup holder and the center piece pulls out.
The window switches just pull strait up i think.
The window switches just pull strait up i think.
rocafella2032
New member
i was pulling on the window switch peices a little but couldnt get them.. i didnt want to break them
TheOtherNick
The mod from over yonder
1. Apply protective coating/tape at the rear of the rear door power window switch (right and/or left door).
2. Remove the rear door power window switch from the rear door trim panel using a small, flat-bladed tool, inserted at the rear of the rear door power window switch plastic mounting plate. Press forward in order to release the rear door power window switch mounting plate.
3. With the rear retainer released, pull the switch to the rear and lift up to remove the mounting plate and switch.
That is all I can find. I am pretty sure the front come out the same.
2. Remove the rear door power window switch from the rear door trim panel using a small, flat-bladed tool, inserted at the rear of the rear door power window switch plastic mounting plate. Press forward in order to release the rear door power window switch mounting plate.
3. With the rear retainer released, pull the switch to the rear and lift up to remove the mounting plate and switch.
That is all I can find. I am pretty sure the front come out the same.
rocafella2032
New member
just tried to pull the center peice out...couldnt get it
TheOtherNick
The mod from over yonder
You might have to use a screw driver to pry up a bit. Start at the consul and work your way forward.
rocafella2032
New member
i got it off and the first coat of paint on it! thanks man