• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Need answers asap, please help!

T

Tsnyder95

New member
Alright so today I started the tear down on my 98 coupe gtp. Starting pulling off vaccum lines and a lot of the "T" shaped boots starting cracking and breaking. Where or how can I either get new ones or fix the ones I have?
 


if you have a advance auto near by stop there and buy the new T's there, they have the best ones i could find at any local store. nice small white t's. come 2 in a pack, for 2 bucks.

everywhere else has these crap 3 inch t's that just dont fit well. ok for temp but they are huge lol

cut 1 inch of vac line put it on the t, then to the fpr or the nupple under the snout then put vac lines to the other ends. it cost about 5 bucks to repalce most of the vac lines when i did my lim. check the evap line too, the fat line off the TB. it loves to break.

limjob11.jpg
 
Thanks guys, life savers! Another thing now, pulled the injectors out and they are terribly gummed up. How can I determine if they are still good or not? I'd rather not buy a new set considering I've already spent close to 1000 in gaskets and parts for this thing and injectors would set me back another 480 from my parts store.
 


gummed up? like the tips from where they wer ein the heads? thats oil, clean them up. oil the o rings with clean oil then slide them back in.
 
You could also grab a new vaccuum line set up from the dealer I think I paid like $12 a few months ago when I grabbed one.
 
You must log in or register to reply here.
Back
Top