• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

N* install and plug question



I swapped to autolites 104's 50 gap and zzp plug wires and im getting a nasty miss and it dies after a few sec
 


Plugs and wires thats all. like i said they are 104's gapped at 50, could it be caused if i didnt screw one of the plugs in all the way? Faulty plug?
 
why did you ask which plugs to use in your NA and then use a two range colder and gapped smaller plug for an SC motor?
Why are you asking which adapter you need to make the N* work on your NA? Either put on the topswap or leave it off. There is no gain to be had by swapping it onto the L36.
 


BillBoost37 said:
why did you ask which plugs to use in your NA and then use a two range colder and gapped smaller plug for an SC motor?
Why are you asking which adapter you need to make the N* work on your NA? Either put on the topswap or leave it off. There is no gain to be had by swapping it onto the L36.
Click to expand...


But i might be interested in using a N* for my csc build using the l36 uim
 


You must log in or register to reply here.
Back
Top