N* install and plug question

[deadsnake]

going to do that tomorrow

 

[bmx6454]

good. cause if the injectors are pulsing good, and you have good spark, then bad compression is my only guess. cylinders 4 and 6? sounds like maybe something is not going well on that side of the head..

 

[deadsnake]

yeah thats my guess. hopefully its not the lifters or the cam

 

[bmx6454]

and you did never answer there question. are you 100% sure u didnt mess up the order? check twice

 

[deadsnake]

yessir. checked multiple times

 

[deadsnake]

2-4-6
1-3-5

 

[bmx6454]

and the coils are:

6
3
2
5
4
1

 

[bmx6454]

damn, came out wrong. but i think u still get the idea lol

 

[deadsnake]

yeah lol

 

[BillBoost37]

If you didn't have the misfire before doing the plugs and wires..then it's something you did or the parts you put on.

 

[deadsnake]

Yes it was there hats why I did the plugs and wires

 

[Rico]

yeah thats my guess. hopefully its not the lifters or the cam

Hopefully it is just the cam or lifters.
Chipped piston, burnt valves or cracked head are much worse.

 

[deadsnake]

Well its a lot easier to replace the head then to replace the lifter or cam

 

[matt5112]

Lifters are easier than heads.

 

[BillBoost37]

Was gonna say.. lifter is super easy. To me a cam is almost easier than a head.

 

[deadsnake]

Don't you have to drop the motor for a cam install

 

[bmx6454]

Nope, the motor can stay in for cam.

 

[deadsnake]

How?

 

[deadsnake]

150 across the board minus 4 and 6 105 in 4 and 125 in 6

 

[matt5112]

drop cradle 6-8 inches on one side.