• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

My Turbo V6 Challenger

C

Craig4465

New member
I love boosted cars , so after driving the GTP for 6 years I let the wife take control of her and I purchased a 2010 Dodge Challenger SE. What a pig this car was. 3.5l v6 . I quickly searched for a cure, even considered building a Eaton supercharger conversion kit for it. But after meeting and talking to a few local MOPAR gear heads they pointed me towards RDP Motorsport. That's when things got interesting, we came up with a plan and went with it. To make a long story short I now own the fastest turbo v6 Challenger on the planet. I still love to drive the GTP and do very regularly. I don't think I could ever drive a car without a turbo or SuperCharger ever again....I'm hooked on the boost.
V6 turbo Challenger - YouTube
LivEvil - YouTube
 

Attachments

  • 310433_240244129365102_890791140_n.jpg
    310433_240244129365102_890791140_n.jpg
    60.1 KB · Views: 52
Last edited:


Minus the piggy part, I think Dodge did the best job with the retro stuff.

Sounds alright too...needs more jetplane brakestand :D
 
I launch it at 3200 rpms . Has a 3500 converter . I have a bunch of mods done to this car. All custom done. It's a fun car to drive.
 


txslow6 said:
What's done to it? Didn't see mods in either video.
Click to expand...
Turbonetics turbo and waste gate . mounted under the car behind the transmission, intercooler mounted behind grill , 3" Stainless Steel Exhaust 1 in 2 out Borla muffler. All custom made. Engine internals are all stock , it has SRT4 fuel injectors. It has at the current time has a 2:86 rear end but I got a 3:91 getrag posi a few weeks ago from RDP Motorsport. I also lowered the car 1.75"s and swapped the original 18" forged rims with a set of Chip Foose 20" staggered rims 8.5 up front 10" in the rear. On those rims I mounted a set of vredesteins tires. Some fat rubber was needed :th_biggrin2: . The car is dynotuned to run on 93 octane fuel it puts down to the ground a solid 350hp with around 400 lbft of torque. On vp100 streetblaze and running the race tune , it's putting down around 430hp and close to 500 torque. I have the dynosheets for the 93 tune , the race tune is a guess using math formulas.
http://craig4465.wix.com/livevil
RDP Motorsports single turbo upgrade package for the V6 Challenger.Featuring the following items.
Turbonetics Turbo
Turbonetics Wastegate
Turbonetics Blowoff Valve
Electric Oil Return System
Air to Air Intercooler
All Stainless Piping
SRT4 Injectors
2 Bar Mapsensor
3" Stainless Exhaust System
 

Attachments

  • v6turbodyno.jpg
    v6turbodyno.jpg
    40.5 KB · Views: 48
Last edited:
blueguy91 said:
Looks like I called it, lol.

:D
Click to expand...
yes you did, its my car in the pics, there are 3 done buy RDP , I was the 2nd one, but the 1st 2010. The others are 2009's they have the crappy 4speeds , I have the 5 speed nag1 . Much better transmission . Handles the power much better. Mine is the fastest one of the 3.
 




TEK310 said:
with 350whp i dont think you would whip its ass, they come 470 horse 471tq
Click to expand...
That is Hp at the flywheel , I am lighter by 300lbs and at the flywheel I have more hp. I go to the track all the time . srts run low to mid 13's , I don't car what road and track says ,I see it with my own eyes, R/T's high 13's mid to low 14's.
 
You must log in or register to reply here.
Back
Top