• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

My '05 V - Summer mode engaged

Re: My '05 V - Headers in. More parts exist. Its slow

V1_zps7b1ff2e5.jpg

V2_zpsf35a792f.jpg

V3_zps7080de5f.jpg

V4_zps473016c6.jpg

V5_zps60a4baaf.jpg

V6_zpse6b0b32a.jpg

V7_zpsa8e7dff2.jpg

V8_zpsca9f420c.jpg

V9_zps01b4855c.jpg


haha.
 


Re: My '05 V - Headers in. More parts exist. Its slow

1, 3, 7, or 9 are i think what i'd probably rock on my car...

but based on being able to clean them effectively, 1 or 9. and between those....1. but camaro wheels....

IMG_3227_zps1e1bb3e1.jpg
 


Re: My '05 V - Headers in. More parts exist. Its slow

the camaro wheels are 20x8/9 +35mm. i'd run the 20x9 set all around.

however, they don't fit the car JUST right. they still look kinda off to me.
 
Re: My '05 V - Headers in. More parts exist. Its slow

My problem with the camaro wheels is that they are camaro wheels, everytime i looked at the v or any other car running another cars wheels i just think they dont belong on that car even if they look good on it.
 
Re: My '05 V - Headers in. More parts exist. Its slow

I think the wheels that are on the black v just in a gunmetal would look pretty damn slick
 


Re: My '05 V - Headers in. More parts exist. Its slow

$2000 worth of wheels alone, then powder coating cost. i'd be over $3000 when all is said and done with tires.

that's steep.
 
Re: My '05 V - Headers in. More parts exist. Its slow

So they only come in silver? If that's the case 3k is really steep I'd be nervous driving it I've got around 2k in the Acura wheels and tires and I b!tch at the wife for getting to close to curbs lol
 
Re: My '05 V - Headers in. More parts exist. Its slow

they come in whatever you want. it's a vip modular wheel. the 'standard' colors are full matte silver and diamond machined face with gunmetal accents, but they will give you any color you want (for more money).

single stage powder: $100/wheel
two tone powder: $160/wheel
full hand brushed aluminum face with a transparent gunmetal tinted clear powder coat: $155/wheel

optional pad height machining (max 3mm off standard offered offsets): $55.00 per wheel
custom bolt pattern: $55.00 per wheel
custom bolt pattern, center bore, and offset: $75.00 per wheel
OEM center cap machining: $75.00 per wheel


they have all sorts of fun options, but they add up quick.
 
Re: My '05 V - Headers in. More parts exist. Its slow

That's cool but yes I can see how that could drain the bank account quickly
 
Re: My '05 V - Headers in. More parts exist. Its slow

i vote camaro wheels, lower it. drive the **** out of it and have a game plan for a project car that you can do whatever you want to
 


Re: My '05 V - Headers in. More parts exist. Its slow

it's most likely going to be the path i go. the camaro wheels look better from different angles...

1470232_713613128727919_8148144972119492749_n_zpse4cac062.jpg


i really just need to get my finances in order so i can get into a new house and start actually working on things like i really want to (including a car AND bike project).
 
Re: My '05 V - Headers in. More parts exist. Its slow

The camaro wheels would be nice. You can always change them up down the road. They do also sell the machined face/black ones as well.
 
Re: My '05 V - Headers in. More parts exist. Its slow

redlinepontiac said:
i vote camaro wheels, lower it. drive the **** out of it and have a game plan for a project car that you can do whatever you want to
Click to expand...

this if you wanna spend a pile of money for something pretty to look at buy a painting lol.
i second the camaro wheels and start a project car when you can!
 
You must log in or register to reply here.
Back
Top