• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

making zzp modded fuel rail returnless

dsmuts

dsmuts

Moderator
Does anyone have any pics of how to do this? I have a zzp modded rail but would like to use it on my 04 comp g
 




There was another guy.. Adecker I think asking about some in chat. Maybe shoot him a pm if Smutty Slutty isn't in for them.
 
I'm in for them. Makes my life easier. Pm me pics I'll send you some of my rail. ........... wait that sounds awful but I'm leaving it
 


reallyfast1 said:
All u have to do is go to home depot get a 3/8 brass pressure fitting with a 3/8 cap I made my own need info pm me
Click to expand...

Happen to have a pic of it? I'm wanting to ic tom and think I might take a half day to get it done before the car show tom night.
 
This is the piece to screw on the cut off end of zzp return side. I cut off before the regulator and capped it there. It will have crush sleves to go on the tube after the nut!
No. 62-R Tube to Tube Reducing Unions, Compression Fittings, Brass & Tubular - Watts Canada

This is the cap to go on the other side of the fitting, I used JB weld as a thread sealer and locker.. edges of tube must be smooth inside and out for it to seal good along with it being on pretty tight to crush the sleve as well!

No. 61-CX Brass Compression Caps - Less Insert, Compression Fittings, Brass & Tubular - Watts Canada
u want 3/8" need any more info shoot me a PM
 
You must log in or register to reply here.
Back
Top