LS1/LS2 metal oil cap overlay
- Thread starter Preotic
- Start date
GR8racingfool
New member
Sweet deal, he should stock many of these and even offer to do some other one off customs, like for those who want to put their screen names on them too. Looks pimp dude, and because its from Reflective Concepts...does it reflect?
~F~
~F~
Preotic
New member
It does reflect. You can pick any color for the background(light reflective silver in my example) and any color for the foreground(burgundy). I believe it's three layers including the dome. As long as it fits in the circle i'm sure he could put anything you want under the dome.
David99GTP
New member
Reflective concepts is great to deal wth. They will listen to what you want and deliver
GeddyLee
New member
I am just curious to where you got the cap. And then I will call Matt and have him make me one 
Matt is good people up there at RF. He worked with me on REMAKING the GTX Badges for the newer design as compared to the metal ones. He was MORE THAN helpful in getting things all straightened out.
He even shipped my badging I have now on my car next day to have it before BGMP last year.
TOP NOTCH!!
Matt is good people up there at RF. He worked with me on REMAKING the GTX Badges for the newer design as compared to the metal ones. He was MORE THAN helpful in getting things all straightened out.
He even shipped my badging I have now on my car next day to have it before BGMP last year.
TOP NOTCH!!
Preotic
New member
eBay Motors: PONTIAC GTO LS1 LS2 MOBIL 1 ENGINE GUNMETAL OIL CAP (item 270215760365 end time Mar-06-08 09:52:17 PST)
As long as it's for a LS1/LS2 i believe it will work.
Be advised thought the little grooves in the gap are sharp and tend to overtime cut off the little nub on the plastic valve cover. You need to take a dremel and dull the machined edges on the cap. I also noticed when fitting it that the cap started taking the smallest amount of plastic off my little nub.
You can see the spot where it started to scrape off material. I dulled the edges on the cap and then i took my dremel and removed the little bit of material tha cap was gonna remove anyway.
Farnsworth warned me about this, i believe he doesn't have the little nub anymore and his cap just sits in his valve cover.
As long as it's for a LS1/LS2 i believe it will work.
Be advised thought the little grooves in the gap are sharp and tend to overtime cut off the little nub on the plastic valve cover. You need to take a dremel and dull the machined edges on the cap. I also noticed when fitting it that the cap started taking the smallest amount of plastic off my little nub.
You can see the spot where it started to scrape off material. I dulled the edges on the cap and then i took my dremel and removed the little bit of material tha cap was gonna remove anyway.
Farnsworth warned me about this, i believe he doesn't have the little nub anymore and his cap just sits in his valve cover.