• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Looking for rim ideas.

Bluemagic

New member
Ok I like this look,

54F3DFCA-7DB2-4FB5-B04A-00FA54F8256D-3372-000000886C470746.jpg


Looking to do something similar on the new black prix after the engine swap this weekend Anyone know of any decent 18s that's close to this look? The car is lowered as well.

Here's a pic of the car
EE827D08-6EFC-4497-B627-8868366D5303-1196-00000024FF2AFE89.jpg
 


18x9.5 enkei rpf1, 5x114.3 bolt pattern, +38mm offset (?).

powdercoated burple.

DUMPED. with stretched tires. you can't pull off "that look" unless you figure out a way to roll around almost touching the wheel to the fenders. :)
 
I know I would be hearing from you soon lol. Your usually spot on and this is no different.

So I would have to dump it. Hmmmm.....
 
but like i said, those wheels are what i listed above. they are very light and actually very affordable for what they are.

you're luck you have the 5x114.3 bolt pattern because if i wanted a set of those in 5x100 i would have to custom order a set and they only do sets in lots of 10 or more...

you can put those on and run them, but without the proper suspension setup i don't think you're going to get it how you want it. just my opinion.
 


Gotta b honest. Doesn't look to bad. Thanks for the photoshop.

I guess some tuner lugs like the first pic will make it pop? And clear coat of course :)
 
tuner lugs wont stick out nicely like the will on the rpf1s since the lug bosses are so deep on the stock wheels.
 
IMO, purple wheels will have enough "pop" all on their own. No need for odd colored lugs. I would just get black ones.
 


Pricing rpf1 rims now.....

Yea they probably won't need to much pop. Thinking of putting a light flake on the rims.
 


Back
Top