• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

LIM aluminum gasket- what kind of adhesive and where to apply?



black RTV.

it goes in the corners where the two gaskets would meet, on the LIM side under the side pieces.
 
okay. its aplied to the 4 corners before and after the gasket is in place got it. my haynes manual says when using aluminum gaskets to aply a spray adhesive to the whole gasket? is that right? it looks like in the video the guy used those kinds of gaskets but didnt do that. is that fine? also, torque specs-- the supercharger i know is 17ftlbs. now for the lim, the ALLDATA program says tighten the lim bolts to 11ftlbs. my haynes manual says the "intake manifold-to-cylinder head bolts for 1993 and later is 132 in lbs." doesnt make sense. anyone help me real quick?
 
IF only there was a torque spec thread in the gen tech section. You do not need any adhesive on the gasket to head area only the corners.
 


You must log in or register to reply here.
Back
Top