• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Let's just rename this PurpleGuy's GTO tuning endeavor



Re: The Purple Car Stock pulley bidness on pg 37

Getting a trans before the turbo setup ever thinks about going on. Yea Sturtermurrr
 
Re: The Purple Car Stock pulley bidness on pg 37

Nice. Then you won't have to pull an Aaron when you pop your IS on saturday night before school monday on your DD... lol
 
Re: The Purple Car Stock pulley bidness on pg 37

And it's also getting a complete new suspension cause the one under it now sucks. Gonna do new LCA's, beefier trailing arms, STB, sway bars front and back. All that crap. Also doing another set of coils before any of this happens. And brakes. It needs at least Fbodys up front. Probably won't go any bigger so I can keep the 16's.
 


Re: The Purple Car Stock pulley bidness on pg 37

Yea it's the T67 from Stattama. Found it layin on the side of the road
 


Re: The Purple Car Stock pulley bidness on pg 37

Plogs, Stattama crossover, Stattama 3" Vband downpipe that bolts up to the stock catback. Tial wastegate. Stattama(Tial knockoff) BOV. Cold side looks to be an eBay pipe kit. Not sure what brand the heat exchanger is.

 
Re: The Purple Car Stock pulley bidness on pg 37

Yummy. Pretty much the same kit Aaron just broke his IS on, except his was a passenger side kit. You'll love it.
 
Re: The Purple Car Stock pulley bidness on pg 37

I better love it. Nooooowwwww. Who knows what car it came off of? Tyler don't say anything.
 
Re: The Purple Car Stock pulley bidness on pg 37

Aarons DP is kinda flattened in that one spot as well. and Its still tricky getting it in with the motor pulled all the way forward and a smaller (impala?) brake booster. But the whole hotside comes in/out in less than 2 hours usually
 


Re: The Purple Car Stock pulley bidness on pg 37

Yea mine is flattened in a couple spots for clearance issues. I'm not sure whether or not it's going to clear the ABS crap. I really hope it does. If not guess I'll convert it to 99+ stuff. And yea Impala brake booster.
 
Re: The Purple Car Stock pulley bidness on pg 37

good luck with the abs mess iirc your gonna need a monte booster and master cylinder iirc. others will know more....
 
You must log in or register to reply here.
Back
Top