Let's just rename this PurpleGuy's GTO tuning endeavor

[NegativeOne13]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

I got some roads to test it on, guy.

I got plenty of test roads.... and plenty of grass to be mowed in the middle of those roads.

I should probably just buy a case of flexpipes for 'round these woods.

 

[blackflag]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

im right at your height. i think i need to raise up 1/2 inch so i dont rub.

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

This pic is a good comparison of how much it was dropped. I raised it a little since then since it was rubbing. But it didn't rub often. Only a couple times I actually noticed it.

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

And another at that height.

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

After I get some fresh axles that don't vibrate I'll prob drop it back down

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

And there's also this stuff

 

[Matt Palm]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

looks gayer than elton john

 

[Fivefingerdeathpunch]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Get motor mount spacers too if you havent.

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Has a full stack of Vinnie spacers Cam. Shuddup Tropical Tree

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Okay. This is a stupid question. Does a TOG 3" downpipe bolt up to the stock catback?

 

[Bio248]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

TOG downpipes were always weld in.

unless someone did the hard work for you, that is.

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Well...the ZZP tog style. They're a bolt in. But I got it figured out

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Random question. Who has a sunroof coupe car? I've got the stuff layin here to do a sunroof in my car. I just need to get a skin which I can pick up for 40 bucks. Just curious if someone could post pictures of their coupe interior showing the roof. Maybe back seat pix and pix from each side through the door?

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

And before some says "you shoulda bought a sunroof car to begin with"...finding a purple Grand Prix is hard enough as it is. Finding one that's a coupe/GTP/loaded up is even harder. And finding one not rusted or beat to **** makes it that much harder.

 

[16MustangVet]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Ummm you realize the skin in between where the roof rails go is EXACTLY the same on the 2 door and the 4 door.

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

I'm just asking for a picture of the interior since the rear of a coupe is different. I just want to see how it looks on the inside.

 

[Sandman]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Like this?

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Yes thank you. Can you take one from behind the driver seat facing toward the passenger a pillar?

 

[Sandman]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Back seat

 

[PurpleGuy]

Re: Marofan's "GTX"...Going low, front dropped on Pg. 24. Still waiting on rear sleev

Thanks Sandman. Not sure if I feel like doing the swap. We'll see. The stuff is just sitting here.

I think I'm going to get a hone tomorrow and see if I can get these sleeves opened up enough to fit on the strut