• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

JDrach's 98 Daytona - Snappin chains 4 days



Re: JDrach's 98 Daytona- XP'd

If you're getting a rack done get new tierods at the same time they will have to align it anyway.
 
Re: JDrach's 98 Daytona- XP'd

Ya i'm going to try and do everything within the same week or so.
And Josh will you ever give that a rest
 
Re: JDrach's 98 Daytona- XP'd

New swaybar, moog tie rods, rack and pinion and power steering fluid. Drives smoother and turning is easy and smooth now. No vibration or shuddering when the TQ converter is locked under heavy load. Woot
 


Re: JDrach's 98 Daytona- XP'd

Also, what Front mount setup should I run? Polly square mounts and regular bushings?
 


Re: JDrach's 98 Daytona- XP'd

Question: after a change in rack
and pinion, is there a break in period for it? The top half of steering left or right ( like 45*) feels ever so slightly tighter than beyond that degree of turning the wheel. The alignment feels spot on, the car stays straighten but like trying to turn or change lane with one hand feels some what tighter than say beyond 90* of turning the wheel.
 
Re: JDrach's 98 Daytona- XP'd

you bleed the air out?

wheels off the ground, car off, turn the wheels lock to lock 15 times. should clear it out.
 


Re: JDrach's 98 Daytona- XP'd

Josh omg lmao
so jack the car up and go left and right til maximum turn 15 times? This bleeds the air out of what?
 
Re: JDrach's 98 Daytona- XP'd

the rack, and the p/s pump lines. i did it cap off. it burped out the top. then i had to top it off a bit here and there.
 
Re: JDrach's 98 Daytona- XP'd

I did that and it's still not as loose when initially turning as i thought. Idk what it could be
 
You must log in or register to reply here.
Back
Top