• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Is a SSIC worth it?



that meth kit for this car beings its ssm90 is quite possibly the best idea marshal has had his entire life lol.

its even cost effective and less of a pain in the dick than an intercooler.

meth > short stack thats for damn sure.

full size maybe a different story but vs a short stack go meth
 
I'm kind of partial to Intercoolers. They make HP and are the one of the best ways to get more power out a M90.

E85 is great if you have it.
 
Lol Scotty I'm running about the same pulley as you and you have a fsic? Wacked

Sent from my SM-G920V using Tapatalk

your cam is the help. rockers are nice but dont flow as good as a cam. stock pulley i was seeing 6.5 boost, stock lim and gen 3, now ported lim ic and the 3.2 like 9 psi.

hit 12 with the 2.8 when i tried that one out for a while. that was knock free but it was also cold out. and i had to drop to much timing to run it too. so im back on the 3.2 till summer, then ill see what pulley i can run best in the heat of summer.

i got 5 pulleys to play with, 3.4 3.2 3.0 2.8 and 2.6 that will never be used lol
 


Yea everyone says no to a ssic zzp said it's better then no intercooler I just don't know if it's worth the gains is kinda why I haven't done it yet

Sent from my SM-G920V using Tapatalk
 
you don't need bigger injectors or an upgraded fuel pump for methanol. if a fuel pump is going to fail, it will fail in the summer or winter. you need to learn to get information from other sources than zzp. that methanol kit for sale on the classifieds is complete. all you need to do is install it, fill the reservoir with methanol and go. some people say to lean the air fuel ratio, other people say not to, because when you inject methanol, your air fuel ratio will go rich.
 
your cam is the help. rockers are nice but dont flow as good as a cam. stock pulley i was seeing 6.5 boost, stock lim and gen 3, now ported lim ic and the 3.2 like 9 psi.

hit 12 with the 2.8 when i tried that one out for a while. that was knock free but it was also cold out. and i had to drop to much timing to run it too. so im back on the 3.2 till summer, then ill see what pulley i can run best in the heat of summer.

i got 5 pulleys to play with, 3.4 3.2 3.0 2.8 and 2.6 that will never be used lol

what happened to the 3.0?
 
quick question, do they make a ssm98 pulley smaller then a 3.4? iirc they dont get to small. looks like they hit the snout faster being they are off set.
 
your cam is the help. rockers are nice but dont flow as good as a cam. stock pulley i was seeing 6.5 boost, stock lim and gen 3, now ported lim ic and the 3.2 like 9 psi.

hit 12 with the 2.8 when i tried that one out for a while. that was knock free but it was also cold out. and i had to drop to much timing to run it too. so im back on the 3.2 till summer, then ill see what pulley i can run best in the heat of summer.

i got 5 pulleys to play with, 3.4 3.2 3.0 2.8 and 2.6 that will never be used lol
Yeah but my heads are ported ALOT, it's bored .020 over, zzp inlet and outlet porting to my gen 3 made it about a gen 5, and the motor is fresh I have a 3.4 and can probably go to a 3.3 with 18° timing 0kr

Sent from my SM-G920V using Tapatalk
 


quick question, do they make a ssm98 pulley smaller then a 3.4? iirc they dont get to small. looks like they hit the snout faster being they are off set.
Lol I'm not running it on the serpentine belt it's setup like a gtp I'm using a SFI crank pulley 8 rib belt I didn't buy zzp's kit for that reason

Sent from my SM-G920V using Tapatalk
 


you don't need bigger injectors or an upgraded fuel pump for methanol. if a fuel pump is going to fail, it will fail in the summer or winter. you need to learn to get information from other sources than zzp. that methanol kit for sale on the classifieds is complete. all you need to do is install it, fill the reservoir with methanol and go. some people say to lean the air fuel ratio, other people say not to, because when you inject methanol, your air fuel ratio will go rich.
Okay seems pretty easy so the meth tank is separate you mount it in the trunk how much meth does it hold? How much do you actually use? I'm assuming there are different jets or nozzles? What kinda gains? Pulley drop?

Sent from my SM-G920V using Tapatalk
 
When you have to choice to pick FS or SS , it's retarded to choose the SS. When your only choice is none or SS. Then I say SS
 
Back
Top