• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Interior LED Mod

How does the UV look? Been curious because I kinda wanna switch to DD's Full Kit. Maybe UV in the foot wells as.....well?
 


The camera doesnt do it justice


Thats the only LED one, my camera doesnt pick up the red too well, the rest are just red bulbs not LEDs.

IMG_0061.jpg

IMG_0060.jpg

 
Last edited:
Just got all of my LED's installed from Diode Dynamics. The footwells are blue and the rest of the car is done in white. Really happy with them.

IMG_0052.jpg
 
Just did this today love it :D I had a picture but it was really terrible quality so I decided not to show...Thanks for write up :D
 
Real quick if anyone is online, how do i remove the pivot clip on the rear lights? I'm having a lot of trouble with it and don't wanna break anything. I have the cover swiveled down right now but I'm stuck like that and would like to get these last LEDs in before the sun goes down.

Also, i found it easier on these rear lights to use a thin dull knife to pry the cover down.
 


i have a question...how exactly do you remove the little light bulb... i was trying to remove the one in the foot wells but i couldnt get it.. i tried spinning it but the the little plastic thing goes into the car..do i just pull down on the actual lightbulb glass part?
 
Sorry I un-subed a long time ago. Eddie, yes, just pull the bulb straight down. It will feel like it might break because they are in tight, but just get a good grip and pull straight down.
 
when i was putting the 194 bulb into the rear socket on one the socket unclipped and slipped into the headliner and doesnt have enouge support so i cant plug in the bulb, anyone have this problem? anyway to fix it?
 
Lishap said:
when i was putting the 194 bulb into the rear socket on one the socket unclipped and slipped into the headliner and doesnt have enouge support so i cant plug in the bulb, anyone have this problem? anyway to fix it?
Click to expand...

Can't you just pull the headliner down and grab the clip back?
 


Lishap said:
i cant just "pull" the headliner down, theres really not a spot to jus pull it down.
Click to expand...

Take the back pillar down. Then in the middle where your seat belt is attached you can take that off. Once those two things are down if you take the brackets off from the headliner (for the 194 bulb) the headliner will come down then.
 
I did the foot well ones except I have mine on a three stage switch. Position 1 is off. Position 2 beats to the music beat. Position 3 is always on. I plan on hooking them up to an arduino I have laying around and adding many more modes like chase and stuff ;)
 


phpVPo6M4PM.jpg


The owner before me added these in, I have no clue how they are installed though and have never checked. I like em though!
 
this is fairly easy, i went a different direction with my truck

white led Courtney lights
58915_10150270481580335_4830518_n.jpg

60461_10150270481850335_3074816_n.jpg


then i added 200 blue led's everywhere i could think of and ran a separate switch
59925_10150270470215335_5534178_n.jpg

59925_10150270470220335_7150991_n.jpg


i even had led bed lights
47470_10150270476375335_2162656_n.jpg
 
You must log in or register to reply here.
Back
Top