• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Intercooler information needed.

the make of the intercooler? a good one. it's right up there with the thrasher and PRJ units because of how it dips down into the LIM with that bigger core.

you win, sir.
 


yes, for sure. get the core pressure tested somewhere for something like $12 and then if it's good then run it and be happy you have one of the best intercoolers.
 
Bio248 said:
the make of the intercooler? a good one. it's right up there with the thrasher and PRJ units because of how it dips down into the LIM with that bigger core.

you win, sir.
Click to expand...

It's not a bad looking Intercooler but the heat exchanger could be bigger left to right. The core could be almost 1-1/2 inches longer and be really close to the boost bypass hole.
 
You must log in or register to reply here.
Back
Top