• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Installing the Coolant Temperature Sensor Problems

Z

ZackN

New member
Hey,

So, as I was installing the sensor, I apparently put too much force behind it and cracked what I thought was the thermostat housing, but after going to autozone to get the part, it doesn't look anything like what I cracked.

It is cracked right under where the sensor screws in on a 2000 Grand Prix 3.8. Any help on what this part is called? Tips on repairing/replacing it, etc would be much appreciated

Thanks
 


Also, is that something that can be replaced by an amateur mechanic, or have I really screwed this thing up?
 
that is your lim the sensor and the t stat house bolt onto it so u would need a lim if u want one i have one from a 2001 let me know
 


It is just a small crack, but it is big enough for coolant to come out of...Do you think there is anyway to just seal it?
 
i'd go ahead and just replace the LIM, especially if you haven't already done the gaskets you might as well just get another LIM and put metal gaskets.

dont feel bad though, i strip so many bolts and threads because i wanna put that finishing touch on every bolt. good luck.
 


hmmm that video does make the lim look like a detailed, but somewhat simple task...On the other hand, my car is in pretty bad shape as it is anyway. It's a 2000 with over a 180k miles on it. It leaks all over the place and I'm constantly having to do repairs on it. If JB Welds would hold just long enough to replace the car, I may just do that. I was worried that there may be too much pressure in that intake for jb welds to hold? Have y'all ever done this successfully?
 
One other question...Where can I find a lim? I've called around to numerous shops that generally have everything, and all they can get is the upper
 
junkyard or used from someone on here is your best bet. honestly, youll find a used one on here from someone for damn near nothing. put up a WTB thread in the WTB section and im sure youll have one within a week.
 
I'm having a tough time believing you cracked an LIM with a brass sensor. The brass should have given and stripped before the LIM cracked. Plus it's in such a place that I'm surprised you can see a crack.

How about a picture of the actual crack in your manifold? Just to ensure that we are all on teh same page and you pulled off the nearly impossible.
 


Well, a picture would be next to impossible due to the location, because I had to use a flexible mirror (kinda like a dentist uses) to look under where the sensor screws into. Sure as snot, there is about a 1 1/2 inch crack running from the sensor across the manifold. I'm just as shocked as you are. I was going to JB Weld it, but I just discovered how big the crack is...With as old as the car is, and with all the other problems, I'm thinking the only thing to do here that is feasible is to just get a new one.
 
You must log in or register to reply here.
Back
Top