• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Im new here. Need head gasket advice

Someone filled the engine with oil. I'm going to flush it out with saltwater and coolant.

rynoman03 said:
Remove the tensioner ;) It think it's a 13mm or a 15mm. The long bolt you almost need a crows foot to get to the nut but it can be done without one.
Click to expand...

Was hoping there was a short cut without having to do that. I knew that's what had to happen but just too lazy to do it


Sent from my iPhone using Tapatalk
 


Yea oil is leakin on the exhaust manifold And it's smokin because of it. Changin the gaskets and some other things. A lot of stuff to do on this car maintance and mods wise. Learning as we go


Sent from my iPhone using Tapatalk
 
illy said:
Yea oil is leakin on the exhaust manifold And it's smokin because of it. Changin the gaskets and some other things. A lot of stuff to do on this car maintance and mods wise. Learning as we go


Sent from my iPhone using Tapatalk
Click to expand...

I think you're trying to replace the valve cover gaskets.

The head gaskets are between the engine block and the head. The valve cover gaskets are between the top of the head and the valve cover.
 
I didn't write the original posty friend did. We will probably end up replacing all most all the gaskets in it while we're in there cars almost at 200k


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top