• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

HUD goes on and off

R

red97gtpcoupe

New member
My HUD sometimes will turn off automatically while the switch is still on..it will eventually come back on. It just cuts off and it does this all the time. Is there anyway I can fix it?
 




hud cuts on and off still

I tried the hud fix I was told to do where you resoldier and it didnt fix anything. My hud still cuts off and on about every minute or so. It will go blank completely and then come back on and keep doing that. Any other ideas?
 
Re: hud cuts on and off still

Don't want to sound like an ass, but you probably didn't reflow the solder correctly.

I'd take it back out, and flow the solder again, making sure it's totally liquid.
 
Re: hud cuts on and off still

One problem, one thread, ....you've been merged. Thanks for playing.

Pull it back apart and flow the solder. You didn't do anything the first time and likely couldn't see if there are traces on both sides of the pcb or not. I forget if there are...however I don't look for a cold solder joint either. I've learned that you pull out hud, reflow solder, reinstall, then smile.
 
You must log in or register to reply here.
Back
Top