• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Horrible coolant leak

Ok.... Anything else I need to know before I put this together? Ill be wiping down contact surfaces and putting the cover back on tonight

Sent from my HTC One_M8 using Tapatalk
 


use a razor blade to clean the mating surfaces of both the block, and the cover, rtv at the bottom 2 inches of the gasket on both sides and the oil pan. bolt it back up. the crank sensor 2 bolts you tq to 13 fp.

the balancer you put it back on the crank, then turn it slowly till it lines up with the key way then pushes on a 1/2 more or so, then you drive it back on.
 
You must log in or register to reply here.
Back
Top