• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Hole In Header :-(

Status
Not open for further replies.


Lets see, 600+ degree headers rubbing the plastic fans, and the headers are damaged. That's some good plastic!
 
Mines been on a few weeks. I can feel the vibration though the body. Better mounts? Here's a shot right now for clearance just standing still..I mean were talking 1mm.

I called up got 2 - 14" Slim Fans. Only 2.5" vs the 4 or 5" factory. A whole $43 dollars.

qu9ehuty.jpg


Sent using my Galaxy SIII on Tapatalk 2
 
Last edited:
^^That.

I bet neither of you have either flipped the dog bones, replaced them with polys, OR checked the condition of the lower motor/trans mounts.

If you have, then I suggest trying to shove that header in the crossover better, because the only issue I've ever had with any set was when I had to give some Imp SS AC lines some love to clearance the front header, fans were not in the way whatsoever.
 


I tried JB weld on a manifold once... That was the worst three hour drive of my life. that crap smells terrible as it cooks. then of course the heater pulls the smell into the car... it fell off shortly after doing it... it didn't exspend/contract as well as the iron. I would NOT do JB weld...
 
blueguy91 said:
^^That.

I bet neither of you have either flipped the dog bones, replaced them with polys, OR checked the condition of the lower motor/trans mounts.

If you have, then I suggest trying to shove that header in the crossover better, because the only issue I've ever had with any set was when I had to give some Imp SS AC lines some love to clearance the front header, fans were not in the way whatsoever.
Click to expand...

My mounts are new just had the motor out.. Thanks though. And it's not a crossover issue the middle outlet off the engine is too long before it curves. I have an 04. Not sure what year yours is.

Sent using my Galaxy SIII on Tapatalk 2
 


rperry435 said:
My mounts are new just had the motor out.. Thanks though. And it's not a crossover issue the middle outlet off the engine is too long before it curves. I have an 04. Not sure what year yours is.

Sent using my Galaxy SIII on Tapatalk 2
Click to expand...

The engine is too long, wat?

lol.
 
Status
Not open for further replies.
Back
Top