HELP!!! Hit cat now ABS no longer functions

[ImColeTrickle]

The cat cut a connection on the passenger rear of my car. It stripped the wires out of a 2-prong male connector that I'm guessing was the connection to my ABS system. I'm having a lot of trouble finding a replacement connector. Any site suggestions or part #'s will be greatly appreciated. Also on a side note since the connection was split my tuned PCM now kicks in the 110 mph limiter. WTF is up with that?

 

[dsmuts]

That's for your wheel speed sensor. You may have to replace the wheel bearing

 

[Josh Ehlert]

If all that is damaged is the wires I would repair them. Go to your local scrap yard and cut a new connector off a Grand Prix and solder it into yours. Better than the $90 wheel bearing, unless that needs replacing anyway.

 

[Explicit_Spade]

If its the male connection to the wheel hub sensor (which is the female), check rockauto. They have all sorts of Male/ Female connectors.

 

[Explicit_Spade]

Here ya go.

ACDELCO Part # PT2830
No pic available, description reads "CONNECTOR,INLINE-TO WHL SPD SEN"


STANDARD MOTOR PRODUCTS Part # S575

ACDELCO Part # PT786

 

[ImColeTrickle]

Thanks alot guys