• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Gtx has a turbo!! lol



Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

Idk I'm done working on my gtp for the night, he tried to say I would have nothing done on my car if it wasn't for him (not true he might help but he doesn't do everything) if he want to be like that he wouldn't even have a jeep if it was not for my grandfather giving him the 300 that he got for junking his car and my great grandmother giving him the rest but I'm goin to try and figure it out by tomorrow because I am moving out
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

Bro, just ignore that a$$hat, get some rest and take your time fixing your ride.
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

Back to my car
IMAG0630_zps958b4d8b.jpg

IMAG0634_zps85dd4e85.jpg

IMG_20130329_194356_zpsd3addfd2.jpg

IMAG0636_zps22baad2d.jpg

Did the back pontiac silver also to match going to paint the windshield wipers black again
 


Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

yeah the wipers need to be black.
good job on the repairs, hope it runs like a champ for you.
Likin those rims!!
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

spazzz said:
yeah the wipers need to be black.
good job on the repairs, hope it runs like a champ for you.
Likin those rims!!
Click to expand...
Yeah I only painted them red because they where rusty looking and red was the only thing I had at the time found some black last night figure I would take them off but I can't get them off they are stuck is there a trick to get them off?
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

wipers have a cap over a nut, pop the cap, remove the nut. then pry the arm up and off, its sits on a fine spline/tapered shaft.
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

Yeah I took off both the fake plastic one and the metal one went to pull up and it pulls everything even tried to push it down then pull up thinking its stuck on something not letting it to come off
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

got a small 2 gear puller? that way the wiper trans and metal cowl dont take a beating.
 


Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

scottydoggs said:
got a small 2 gear puller? that way the wiper trans and metal cowl dont take a beating.
Click to expand...
No I don't ill just have to paint them on the car or try one more time to get them off
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

if you have a claw hammer, or pry bar, lift from under the arm, then tap the stud/shaft with a hammer, it should pop off.
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

Alright ill try that I kinda want to eliminate the red it catches too many cops eye
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

Ok so I look and I found to problems one is a bolt hole not sure if its for anything because I used everything its right by the egr
IMAG0643_zps9a520446.jpg

And I found a crack in the plastic gas line the one on the passenger side
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

IMAG0645_zps2666cf32.jpg
IMAG0639_zpsd8a89ee5.jpg
IMAG0648_zps6b463d0f.jpg
IMAG0650_zps2bb33c35.jpg
Going to debadge the trunk soon
 


Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

Paint the trunk lid..but I'm sure you plan on it when the time and money is available right!
 
Re: the start of lim and valve cover gaskets, put 1.9 rr and 105 ccs in now? 98+97 gt

REDCOMPG said:
Paint the trunk lid..but I'm sure you plan on it when the time and money is available right!
Click to expand...

Ohh ok yeah I start my new job in a week but its home depot so discount on the air compressor and paint handles and I'm actually going to strip the hood back to silver and make the car silver this summer if possible
 
You must log in or register to reply here.
Back
Top