• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

gp meet at Dan's house oct 13



I made a noise (groanish) when I saw "little brackets", and realized.. you didn't wanna "wiggle" the plastic in and out w/o pulling the cover. A local bought an 06 last week. We will be working on it and I'm going to have him pull those off before anything else. ... Texted him. I better never see those on his car.
 
BillBoost37 said:
I made a noise (groanish) when I saw "little brackets", and realized.. you didn't wanna "wiggle" the plastic in and out w/o pulling the cover. A local bought an 06 last week. We will be working on it and I'm going to have him pull those off before anything else. ... Texted him. I better never see those on his car.
Click to expand...
I'm going to glue them to your front door while you're at work:th_tongue2:
 
I use the garage door, I'd never see them on the front door.

And ...I'll drop New Blue on you after giving you crap about killing Blue 1.

Yes... yes you heard it right, he had a blue abomination that blew axles before you could take it off a jackstand and he bought......another blue one.
 


My buddy wasn't working yesterday and he is the only one who will clear them at the auto parts store. So to answer your question...no. It still drips a little out of that fitting but not much, maybe a few drips. Drove it to school yesterday and check the fluid when I got there and it was still good. Wife noticed the difference between the spent trans and the new one last night. She was happy.
 
Good to hear. Those codes will probably clear out. The last time I flashed my pcm it left a code. I cleared it and it never came back
 


I'll see if he is working today and have him clear them. I need to get me one of those fancy scanners. Would come in handy. In other news, I told Greg yesterday that the next meet is at his place and he was cool with it. Might be in February since he is soooooo busy. lol
 
To fix that drip.. pull the clip, wiggle line out, put clip back on, wipe end of line and reinsert. I know it seems too simple, works for me every time.
 


I do need to get the car back into the air because my rattle in the rear has cause the tire to wear on the inside. Could my fron alignment be off after the install? My steering wheel is off center now.
 
Your tire didn't wear out on the drive home. Find the rattle. Fix known issues.

As for the wheel..that's because the cradle is a little to one side. Shouldn't cause tires to wear faster..just have the wheel off a smidge
 
I'm guessing the rear has been this way for some time, even before we bought it. I couldn't tell if it was something in the suspension that rattled or her license plate frame that did. After seeing the tire I'm sure I will replacing something. Should I get the car aligned to get the wheel back to center?
 
You must log in or register to reply here.
Back
Top