Getting cat back off

[Kolton Lock]

So I need a new gasket around my cat back bolts and I can't seem to get the bolts off. They seems to be rusted on. But with how hard they are too remove I am willing to say they are welded....

Any ideas on getting these out?

 

[gotgtp]

Lots of PB Blaster and let it soak in


Sent from my iPhone using Tapatalk

 

[dsmuts]

I had to cut mine and drill new holes and use new bolts.

 

[Kolton Lock]

I had to cut mine and drill new holes and use new bolts.

ickkkk...sounds liek alot of work :th_sick1:

 

[dsmuts]

It wasn't to bad the drilling was the worst though because of my crappy bits i had.

 

[gtpeddie]

its not to hard i had to cut the bolts to the factory DP i just torched them off. and put a nut and bolt to hold my ZZP DP i did it all at once here are some pics

this is the old cat back

this is the new one stock mufflers thrush glasspack, i put better OEM mufflers in (mine had holes) then cleaned up the factory piping with a wire wheel and painted it.