• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

FINISHED!! Dash Z LED Projector Headlights! Review!



No joke that's what I was thinking too. They look pretty goofy just sitting there.. but on the car, they look pretty mean. Sweet now I'm gonna be able to see at night... who would have thought this was possible in a Grand Prix...
 
nawarkk said:
No joke that's what I was thinking too. They look pretty goofy just sitting there.. but on the car, they look pretty mean. Sweet now I'm gonna be able to see at night... who would have thought this was possible in a Grand Prix...
Click to expand...


Yeah You can def tell when your headlights are on now rofl.

and FYI all my photos are with a H3 35W 6000K HID Kit.

NO idea how good the stock blubs are.

:) and i adjusted mine so they are HIGH!
 
Well I'm gonna rock the stock bulbs just so people know how those are for a little bit.. Then I have the same thing waiting, an H3 6000k HID kit. Once i figure out how to wire it, I'll put that sucker in. I'm excited for tomorrow!
 
nawarkk said:
Well I'm gonna rock the stock bulbs just so people know how those are for a little bit.. Then I have the same thing waiting, an H3 6000k HID kit. Once i figure out how to wire it, I'll put that sucker in. I'm excited for tomorrow!
Click to expand...


HID Kit is Plug and play into the Ballast

the only thing you have to Wire is the Halo & LED wires.

And those are cake. go buy the quick splicer's from autozone

Strip your White & black wires about a inch and then twist both The White together then both of the black together


use a razorblade to strip the Lowbeams +wire and the lowbeams Ground wire then put the White onto the + Use the quicksplice to clamp it donw

and then take the black to the Black ground on the lowbeams use the quicksplice to clamp it down. and Judgement call on Wraping it in electrical tape
 


Well I don't know if you mentioned it earlier but is there a way I can wire it to a switch? Maybe even a switch for the halos and for the LED's? Probably just from looking at the wires I can get it to work, but did you know how too?
 
nawarkk said:
Well I don't know if you mentioned it earlier but is there a way I can wire it to a switch? Maybe even a switch for the halos and for the LED's? Probably just from looking at the wires I can get it to work, but did you know how too?
Click to expand...

neverwired em to a switch before.

No idea why you would want to. They look awesome driving around town. Ive never seen anything like these.
 
I was thinking to wire them to a relay and have the HALOs/LEDs on whenever the car is on.

I think it would make them stand out more than with the low-beams on, too.
 


The car is factory with DRL's so even if you disable them you will still get a discount even though I never heard of a DRL discount. Unless of coarse you call and tell them what you did.
 
Stunt0Rider said:
The car is factory with DRL's so even if you disable them you will still get a discount even though I never heard of a DRL discount. Unless of coarse you call and tell them what you did.
Click to expand...
Mine must have been disabled, then. My lights don't come on during the day.

All the more reason to buy snazzy projector headlights and make the HALOs & LEDs run all the time. =]
 


Are any of those pics with the High Beams on? It looks like in the Second picture or so, with the light showing in the trees. Also how is the adjusting on the headlights?
 
Your night shots look nice but it still does not show how good the cut off is on these. Do the beams cross at all?
 
You must log in or register to reply here.
Back
Top