• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Engine swapping help!!

Ok leadway!!!! Just installed my tps sensor after a heavy fight with the car it starts! If the cam was f***ed wouldnt have even ran lol It ran for 2 mins then shut off tho but my spark plugs still have fuel in them like sh** so ima buy new plugs autolite 104's today and grab a fuel pressure regulator because I think that will solve my fuel issue hopefully then a mail order zzp tune for the cam coming this week gotitforcheap the rack is scheduled for friday for me to finish I got some jack stands so It should be good now hopefully

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 


Last time when me and Jeremy replaced them but im changing them when I get hm from work

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 


if you can start and run the car with your foot on the throttle then none of what you are changing is gonna fix it.

have you not checked the IAC ? take it out see if its dirty and or replace it.
 
Have you not checked the Maf yet?
I've got one I can send you to test it with if need be. You just have to send it back or buy it. Lol

Sent from Not so smart smartphone
 
got the car running guys tps replaced fresh plugs in car is a beast! only issue is this



Any suggestions? Could I use header wrap? Band clamps aren't working smoke is coming out of the crossover
 


Lol thanks i'll try that along with header wrap other than that I just need to change oil and fill coolant and the car is ready to roll!!
 


Take the headers off and have a V-band welded on there so you don't ever have to worry about it again. It's going to be a ***** to take them both off again though.
 
Pure2sin said:
Take the headers off and have a V-band welded on there so you don't ever have to worry about it again. It's going to be a ***** to take them both off again though.
Click to expand...

Thats the right way? Aww man ima ghetto rig em and use header wrap and put the band clamp on it

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
You could also try to use a torctite clamp but you would have to cut one side. I can't tell how big of the curve is there from the picture so it might not work.
 
You must log in or register to reply here.
Back
Top