• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Engine conversion kit

i was trying to be nice:D

that's all fixable tho, its just going to take some time and patients. it does look like who ever did it was not knowing what they were doing and were in way over their head.

look at this way, by the time you are done you will be the best wire solderer on the boards here lol
 


I clean mine everytime I pull it out of storage. If it builds up too much, it takes some time with a wire brush.
 
Just wondering if anyone else had any opinions on the photos of the wiring situation in the engine bay that I posted in the middle of Page 2 of this thread.
 


I'm pretty sure its the ECU mounted under the airbox. What I don't know is if it's the original with the car or the one that came with the new engine. What would posess someone to do the splicing like that. I wish I knew what the point of it was.
 
Hey Bill. John here. Was curious if you had a chance to check my pics I posted in the middle of page 2 of this thread.
 
I'd say it looks like they disconnected the old map and maybe reran new wiring. Definately needs a bit of polishing to get it where it should be. I'm going to go check out the codes and do a little more looking. We should set something up to get that finished up.

For what it's worth, that electrical isn't bad to fix up. ;)
 
Man, you just made my day. Thank you!!! This has been a very stressful situation for me. Yeah, we can definitely set somethin up. Let me know when and what you're thinkin when you get to that point. I'm flexible. It's whats convenient for you. I work all week so a weekend day would be best for me but no problem if not. I'm 3 hrs away from you. I am very punctual so you pick a time I will do my best to be there.
 


Anyone notice the thing that looks similiar to an EGR valve sitting almost behind to the elft of the EGR valve?

Unless maybe the car has california emisions im not sure what that is.

Never seen that on my supercharged grand prix.

It might even be easier to get a new engine harness on ebay from say morad, they are usually year specific unless you want to modify.

Not that bad to change out either, I just replaced the engine in jkine and the harness was quite easy to reinstall.
 
I think it'll be an easy fix w/o swapping the harness.

Codes:
P0053 is an O2 related code
P0068 http://gearchatter.com/viewtopic10729.php?highlight=p0068&sid=bb635fcc010d437c299699f7644bf005
TP related
P0089 Inj ?
P0107 Map http://gearchatter.com/viewtopic11763.php?highlight=p0107&sid=bb635fcc010d437c299699f7644bf005
P0243 Boost Control Soleniod
P0443 Evap purge valve http://gearchatter.com/viewtopic11726.php?highlight=p0443&sid=bb635fcc010d437c299699f7644bf005
P02228 Map related

Looks like there's a few things to look over for sure.
 
Last edited:
Easy huh? lol. you're the first person to say that. I'm hoping you're right. I would love to drive and enjoy the car. No one around here seems to know what to do without reversing the whole wiring and ecu mess
 
Unfortunately this is beyond my knowledge. Sucks to be helpless. Hard to find people that know what they are doing and/or talking about.
 


What about the motor? Would you need to know what it came out of and what year? I don't know if it was a rebuild or not.
 
michaelbm said:
Anyone notice the thing that looks similiar to an EGR valve sitting almost behind to the elft of the EGR valve?
Click to expand...

He has secondary air on the intake box so its possible.

OP, wouldnt worry about it.

Fix electrical.

Find out if PCM is correct.

Enjoy car.
 
Well Matt, if the car was top swapped, I'd be a little concerned running stock mani's on an L26 w/ a GenV. If it was a stock L32, not so much. And no scan gauges.... dunno.
 
The only way to tell if the PCM is correct is to scan.

If it needs adjustment, then via a tuner.

Thus the tuner will know if he should be concerned with flow.

Its more important to have the electronics functional first.

Then sort out tune as previously mentioned.

THEN we can talk headers.
 
You must log in or register to reply here.
Back
Top