egr removal

[Tony]

What is the best way to remove the egr and seal it all back up?

 

[Taz Magister]

penny

 

[cliffdawg]

ill be doin this prob on my car sometime this week but a penny and copper rtv sealant

 

[kurt5153]

quick question will it throw a code?

 

[machinegunsquid]

Yes it will throw a code. Yes you will notice a drop in gas-mileage.

It will greatly clean up the engine bay, and keep the lower intake cleaner.

 

[SlowNA06]

Yes it will throw a code. Yes you will notice a drop in gas-mileage.

It will greatly clean up the engine bay, and keep the lower intake cleaner.

Don't forget "keep engine temperatures higher at cruise"

 

[Bio248]

best way to do it is not to post in the how-to section with a question.

moved.

 

[z3r0]

ill be doin this prob on my car sometime this week but a penny and copper rtv sealant

post pics?

 

[z3r0]

3800 O-ring'd EGR Delete: Milzy Motorsports

 

[BillBoost37]

Wow, really like the look of the Milzy pieces. Although I take the end off the EGR tube and penny it with some RTV.

 

[NegativeOne13]

But you'd end up spending upwards of 50 bucks compared to the $0.01 and 6.99 for RTV.

 

[BillBoost37]

Just saying, theya are nice. Good and clean for the guys that want that look.

Ever see a ZZP block off plate. Geezus.. I'd be ashamed to charge that much for a piece of aluminum. The Milzy one is clearly machined nice and well thought out.

 

[NegativeOne13]

Just saying, theya are nice. Good and clean for the guys that want that look.

Ever see a ZZP block off plate. Geezus.. I'd be ashamed to charge that much for a piece of aluminum. The Milzy one is clearly machined nice and well thought out.

Very true, they are very pleasing to the eye. And screw that ZZP noise.

 

[z3r0]

i have the zzp egr exhaust delete, and thats only because they came w/ the headers

so the intake side you can just use a penny?

 

[machinegunsquid]

Yep. I can send you the other one if you want, totally forgot about it.

 

[BillBoost37]

I use the EGR pieces that hold the tube to the LIM/manifold and a penny with a little RTV on both sides.

 

[Bio248]

i did exactly what bill did, but i used a nickel and a dime. so mine were better.

 

[kurt5153]

How do you block off the egress on the headers?

 

[Bio248]

with the flange off the EGR tube, a coin, and RTV.

just like the LIM side.

 

[BillBoost37]

I go cheap with a penny, bio is baller and spends six cents.