• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Dog Bone bushing and Upper Motor Mount.

Brammer

Brammer

New member
My OE's are going bad, I was just going to replace them with poly ones. The question is what's the collective feedback on ZZP's Vs. Intense's Vs. 3800Performance's? Are any of these better/worse than the others? And before I'm warned about vibration, I don't care, my old Dodge Avenger had solid all around with a 3.0 swap, sounded like a monster truck inside due to the body panel vibrations :th_biggrin2:
 


I had the ZZP 2 piece mounts first and I would get a annoying clunk anytime the car changed gears. Replaced them with Intenses one piece mounts and never had a issue.
 
+1 on Intense. Took me about an hour to install, but that's only because it took me about 45 minutes to get the old bushings out (which involved ripping them to pieces first as they refused to come out and ignored all the PB I could throw at them).
 
hensleya1 said:
+1 on Intense. Took me about an hour to install, but that's only because it took me about 45 minutes to get the old bushings out (which involved ripping them to pieces first as they refused to come out and ignored all the PB I could throw at them).
Click to expand...

Cutting bit on a dremel makes quick work of those!
 


You must log in or register to reply here.
Back
Top