Did a scan after zzp ecm install, kinda okay?

[biggz]

So i did like everyone said and I did a scan of my 98 gtp after my zzp install. zzp 1.0 ecm, cold air intake, 180* t-stat, 3" dp, straight pipe through resonator, 3.4 pulley. I was using a snap-on solius ultra scanner. At WOT it usually read .3* which i figured was due to the general condition of the car, mounts, suspension, etc. The most it saw was like 1.5*. Almost it was reading about 15.5* advanced timing at WOT, is this within the normal threshold??

 

[matt5112]

its okay, not ideal.

 

[biggz]

any suggestions I have not put in the autolite 104's yet

 

[matt5112]

that might do it.

Possibly not though.

 

[Fivefingerdeathpunch]

To me, 104's are too cold for what you have done.

Just another question though, how fast did you end up going, gear to get these reading?

 

[biggz]

I scanned it at WOT from 40 to 110 mph and let the snap on solius ultra graph it for me

 

[Sushamouf]

What was the ambient air temp?

Sent from my Droid

 

[biggz]

It was 68* and 100% humidity

 

[dsmuts]

100% humidity?

 

[blueguy]

That's humid as **** LOL.

 

[biggz]

It was muggy and still raining