• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Delilah....dyno rackar

you said build all trans = part of the car lol

Labor money = turbo kit money just sayin.......

BTW want a 4t65 ATSG transmission PDF manual?
 


98GrandPrickVet said:
you said build all trans = part of the car lol

Labor money = turbo kit money just sayin.......

BTW want a 4t65 ATSG transmission PDF manual?
Click to expand...

I'll PM ya. But turbo kit im making my own. National speed is fabricating the turbo logs when I get engine assembled

Sent from my HTC6525LVW using Tapatalk
 
Nothing new with the car yet.
Been working on our lav all week. Taking 1 of the 5 diffs out to replace it. We ****ed it up off roaring Friday.

Sent from my HTC6525LVW using Tapatalk
 
Finally got my cam spec sheet back for Patrick G. Pretty happy with them but a stall is definitely a must. Ask 91parkave lol. Ordering springs rods and rockers this week.

Sent from my HTC6525LVW using Tapatalk
 


Changed the oil for the last time after having the engine apart for so long. Also went and greased all my suspension grease nodes cause I missed doing that last month

Sent from my HTC6525LVW using Tapatalk
 
So been a bit since I updated this.
Changed inner and outter tie rods, lower ball joints.



Also lots of purple power cleaning of my sub frame and under side of the car. No more crazy dirt build up




And most of the nasty brown water is from the crazy amount of dirt and grease build up on my car


Coolant flush with a 180 tstat installed now.

Old tstat




Dirty ass air filter. Need to order a new one.


New tstat



Tomorrow the car is getting a washing, clay bar, and a good orbital buffing


Sent from my HTC6525LVW using Tapatalk
 


Started installing my stainless steel brake lines today and for some ungodly reason I'm riding the struggle bus

Sent from my HTC6525LVW using Tapatalk
 
So fellow GPF peeps. I've got a problem I need some more input on.
When going around turns I get a wobble in the rear end...like fish tail.
Replaced the hubs, sway bar end links, and the bushings this weekend (both sides)



Also trying to find this rubber piece that's part of the parking brake hardware.

Ordered new ones of these for both sides.








Anyone got any ideas

Sent from my HTC6525LVW using Tapatalk
 
But with the BMR components they should be able to fully adjust without slotting the struts right?




Sent from my HTC6525LVW using Tapatalk
 


nope, they only do toe in and out. you need your camber fixed, aka camber bolts, or slot the top strut hole and tell the shop is slotted so they can work with it.

thats some neat looking suspension parts none the less.
 
****. Well since I work at O'Reillys I guess I'll go with camber bolts. Employee discount is worth it lol.
But would that cause the rear end to feel like it's fish tailing a little around turns

Sent from my HTC6525LVW using Tapatalk
 
You must log in or register to reply here.
Back
Top