• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Delilah....dyno rackar

Re: Her names Delilah......wobble wobble wobble

Welcome to my world I literally threw the whole interior back together just to take it down the road to the shop. I only had the driver seat and thats all installed for the longest..no headliner, carpet or other seats. I've had the interior gutted a few times and always seem to forget to do something when I put it back together.
 


Re: Her names Delilah......wobble wobble wobble

So....ultimate sunroof test....massif storm on the way. Any place that leaks...doesn't get treated nicely anymore. It shall be only jb weld from this point on
 
Re: Her names Delilah......wobble wobble wobble

recheck everything so you dont have to use jb weld. hope it dosent leak on you. Have 1 bucket on the ready
 


Re: Her names Delilah......wobble wobble wobble

i was a commercial roofer for over 20 years, polyurethane calk will seal almost anything water tight for 20 years. but it must be polyurethane calk, not silicone or silicone base.

P&L caulk was the last real good brand i used. cheap at 5 to 6 bucks a tube. it sets up really firm, and sticks like glue when cured. its a b1tch to get back off.
 
Re: Her names Delilah......wobble wobble wobble

Scottydoggs said:
i was a commercial roofer for over 20 years, polyurethane calk will seal almost anything water tight for 20 years. but it must be polyurethane calk, not silicone or silicone base.

P&L caulk was the last real good brand i used. cheap at 5 to 6 bucks a tube. it sets up really firm, and sticks like glue when cured. its a b1tch to get back off.
Click to expand...

Interesting info....maybe why the calking I did awhile back only held for a couple months....can polyurethane calking a and window weld with stand the heat the sun produces up there
 
Re: Her names Delilah......wobble wobble wobble

So far my work seems to be holding. It started raining 10 minutes ago. I can see the water coming out of the drain hoses under neath and can't see a single drop inside of the car. So I think I did it only time and more rain shall see. I'm still going to get some more poly calking and window weld just for piece of mind
 
Re: Her names Delilah......wobble wobble wobble

marines542 said:
Interesting info....maybe why the calking I did awhile back only held for a couple months....can polyurethane calking a and window weld with stand the heat the sun produces up there
Click to expand...

i used it on metal copings that flex in wind and expands with heat and cold, brick to metal, windows, if i was in a pinch, right on a EPDM ( rubber roof) or hot tar or modified roofs. as well as right on shingle roofs. stuff sticks like mad.


is that hot enough for ya? lol
 


Re: Her names Delilah......wobble wobble wobble

Scottydoggs said:
i used it on metal copings that flex in wind and expands with heat and cold, brick to metal, windows, if i was in a pinch, right on a EPDM ( rubber roof) or hot tar or modified roofs. as well as right on shingle roofs. stuff sticks like mad.


is that hot enough for ya? lol
Click to expand...

O that's hot enough.....it kinda turned me on for a second
 
Re: Her names Delilah......wobble wobble wobble

OK. No pics today but did finish rewiring my custom interior led lighting. Much better now with no wires visible at all.
Also going to get a longer aux cord and another CIG lighter to wire into the stock lighter system to hide under my center console so my IPod charger won't be seen anymore.
And right now I'm drilling a hole in the console to run my iPod cord (for iPod) and my aux cord (for any other jack as*es in my car) into the center arm rest so no more cords period are visible.

So much progress to not show pictures...but I'll show y'all when its all said and done
 


Re: Her names Delilah......wobble wobble wobble

So its been raining all day here...pouring most of the day. Well I can't see a single leak in the moon roof. I've got one more thing to do for a piece of mind but I think I've fixed it
 
You must log in or register to reply here.
Back
Top