• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Delilah....dyno rackar



Re: Her names Delilah......wobble wobble wobble

I wanted to post this up. A guy on gmls4 said he thinks that this is my problem

Sorry been busy, from what I see your problem is the passenger side (leaky side) inner CV joint and possibly the outshaft bearing (7B) and thrust washer (715) in the attached diagrams... of course the seal will have to be changed again (4)




The Stabiliser endlinks should be changed as a set/ same time, if they were changed at the same time, one side has no grease fittings
LCA bushings look ok but they are starting to carbonise you should plan on changing within 20000 miles or so.


And I can't get the pics to show so I'll post them later
 
Re: Her names Delilah......wobble wobble wobble

^^^^ anyone else have some input on what the above guy mentioned
 
Re: Her names Delilah......wobble wobble wobble

Something to try...swap rear wheel up front and see if the wobble exist
 


Re: Her names Delilah......wobble wobble wobble

OK on a topic that's not wobble I got my tranny cooler from TEP today. Talk about nice! Pics coming later
 
Re: Her names Delilah......wobble wobble wobble

Here she is. This is the larger cooler that's a complete radiator bypass with remade brackets to bolt right up to the frame for easy installation. It is 6 inches tall I'm sure the 4 inch one would of bee fine but I figured go big or go home. The AN fittings on the cooler its self have been welded into place so no chance of leaks.
Over all this will definitely be a great upgrade from stock

P5170012_zpsdb4554e8.jpg

P5170013_zps0dab3910.jpg

P5170011_zpsacff194f.jpg

P5170001_zps2b876deb.jpg

P5170010_zps82bcf4cf.jpg

P5170006_zps06a94710.jpg

P5170007_zpsb53e0da3.jpg

P5170008_zps0abbb9cf.jpg

P5170009_zps4420a008.jpg

P5170005_zps50cfd1f8.jpg
 


Re: Her names Delilah......wobble wobble wobble

will those an fittingsscrew into the transmission return port? looking for a way to get rid of the weeping drip i get randomly
 
Re: Her names Delilah......wobble wobble wobble

Son of a Bit*h my leaking sun roof problem has returned. Well time to take my interior apart again. I'll probably buy a brand new seal and use the window cocking to fix it more permanently this time. Damn things really pis*ing me off.
 


Re: Her names Delilah......wobble wobble wobble

dsmuts said:
Where is it leaking? And it's caulking
Click to expand...

Passenger side in the front and rear corner. Its been an on going fight to fix it. I've tried blowing the drains out and their free of obstructions
 
Re: Her names Delilah......wobble wobble wobble

If you want a good seal use 3m window weld and use hose clamps or lock wire on the drain tubes to make sure they never come loose
 
Re: Her names Delilah......wobble wobble wobble

Yea I already have hose clamps on the drains. Did that the first time around. I think I'm going to take the full roof off and completely redo the seal and have the fabric on the inside of the roof cleaned cause its got water stains now
 
You must log in or register to reply here.
Back
Top