• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

cobra rims?



Bolt pattern will work, but cobra rims are staggered IIRC, so the back ones would probably be too wide to fit w/o rubbing
 
are you referring to real cobra r's or aftermarket ones? either way theyre not staggered. real ones would be 17x8s and aftermarket are usually 17x9
 
marlow331 said:
are you referring to real cobra r's or aftermarket ones? either way theyre not staggered. real ones would be 17x8s and aftermarket are usually 17x9
Click to expand...

Well then, the 17x8's should be ok, but the 17x9 will probably have rubbing issues w/o other work and or spacers
 


02BlueGT said:
Well then, the 17x8's should be ok, but the 17x9 will probably have rubbing issues w/o other work and or spacers
Click to expand...

do you run cobra rims that you know this? 17x9 is fine, even with the +24mm offset ones. therefore, you are wrong.
 
Bio248 said:
do you run cobra rims that you know this? 17x9 is fine, even with the +24mm offset ones. therefore, you are wrong.
Click to expand...

17x9's with the +24mm will not fit with out rubbing....im rubbing 03 cobra style 17x9s with a +26 mm offset and they rub slightlly.....you may be able to pull it off with a 245 wide tire im rubbing 255's and they are barely and i mean barely scrubbing the fenders...my fenders are rolled they hit up inside the the fender not the edge...
 


You must log in or register to reply here.
Back
Top