Can u make your supercharger louder without an intake?

[thunder71173]

You thread the hole on the bottom side of the case and install a grease fitting then press them out with grease.

New ones can be pressed in.

So they come out with the pressure of a regular grease gun? Or does it have be an air gun? The trick to put bearings in is put them in the freezer overnight and they generally slide right in.

 

[matt5112]

I would think air would be necessary.

Not 100% sure though.

 

[thunder71173]

I think im just gonna take em to a machine shop

 

[Bio248]

you use a grease gun.

 

[thunder71173]

Sweet I will try it tommorrow! Does anyone know what size and pitch of tapto use?

 

[fremmy182]

with a ported supercharger how many mpgs do you lose

 

[Bio248]

none. you wont gain any either.

 

[fremmy182]

now will you gain any extra horsepower, or just cooler temps

 

[Bio248]

itll reduce knock given that you have it. however, you really dont gain any power out of it.

 

[fremmy182]

and one more question. my fins are like peeling, would it be fine if i put water on them and take the stuff off it?

 

[whereswaldo01]

yeah thats a good question fremmy has. Mine is peeling also

 

[TheOtherNick]

You guys should try reading. You have never seen a discussion on Gen III rotor pealing? ever? That coating is what makes the seal with out it you will be lucking to hit 3psi. You need new rotors.

 

[whereswaldo01]

nah i havent, but thanks

 

[blueguy]

Or try the search button.

It has magical results.

For real.

 

[TheOtherNick]

Or try the search button.

It has magical results.

For real.

Where are these magical results I only get normal ones.

 

[blueguy]

Then you lost at life already.

 

[TheOtherNick]

Then you lost at life already.

Just following in the steps of the gp greats. lol

 

[blueguy]

Streetwolf...lawlz.

Oh wait...Chris Duke.

 

[justin1795]

how hard is it to trasfer stuff from the old supercharger to the new case?

 

[Bio248]

easy.