• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Build Thread: Addicted to L67's~updated 4/6/2013



Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

ya ive seen those. just still feel uncertain about it. mainly just need pan gasket n a scuffing pad. but lets not get off topic from the fiero. My co worker too is building a fiero that he's been at for a while. I think he wants to put an l67 in it. Would be nice to see one of these bad boys in person.
 
We didn't get off topic...u ask for shift kit write up I provided u with one

Sent from my DROID RAZR using Tapatalk 2
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

I have never been inside a transmission before, so I will be referencing from a guide I found somewhere, I will have to re-find it and link you to it, if I am not mistaken it was by billboost...but dont quote me on that.
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

if its the transgo shift kit im thinking off, i believe you just take out the accumulator when you drop the pan
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

I have heard if you increase line pressure on the trans for shifts you aren't suppose to combine that with a shift kit. Is this true or false?
 


Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

I have heard if you increase line pressure on the trans for shifts you aren't suppose to combine that with a shift kit. Is this true or false?


im sure there would be a happy middle of the road if you tuned line pressure and used a shift kit.

upping line pressure via tune is almost the same as a shift kit. the same results are achieved.
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

makes me wonder with the increased line press from the zzp can tuned will hurt the trans with a transgo kit
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

I have upped line pressure and a thrasher shift kit and it's fun
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Been fine for 40K miles. I'm at almost 230K now.
 


Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Wow, I just finished reading through the entire thread. Excellent project and super work on the motor! Can't wait to see it all back together and running. Aside from the Fiero, I see you have a nice GenI. Do you belong to any FZ1 Forums?? I'm over at FZ1-Forum International.

64F5CEE2-3B5D-44B1-8EEF-F82201163741-10904-00000F16402E6FCF.jpg


I like the exhaust and the diamond plate side covers!
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Most people that do these swamps with minor weight reduction( spare tire, etc) run about 2650 dry curb weight

My car is a bit over 3000lbs and its a base base coupe with some good weight reduction (interior/dash/front end/AC/trunk) with light wheels on it.
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

My car is a bit over 3000lbs and its a base base coupe with some good weight reduction (interior/dash/front end/AC/trunk) with light wheels on it.
Assuming you weighed it with yourself, and fuel in the tank, that would fall right around what I said, I'm sure you turbo setup is an extra 100 pounds too.
Wow, I just finished reading through the entire thread. Excellent project and super work on the motor! Can't wait to see it all back together and running. Aside from the Fiero, I see you have a nice GenI. Do you belong to any FZ1 Forums?? I'm over at FZ1-Forum International.






I like the exhaust and the diamond plate side covers!
Yeah I am on FZ1 forums, and that is my other baby, an 03 Gen I FZ1, I got it last spring and have put over 10,000 miles on it so far. I am debating going to a GenII, but reallllly love the new crossplane R1's. we will see what this summer brings!
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Assuming you weighed it with yourself, and fuel in the tank, that would fall right around what I said, I'm sure you turbo setup is an extra 100 pounds too.

Yeah I am on FZ1 forums, and that is my other baby, an 03 Gen I FZ1, I got it last spring and have put over 10,000 miles on it so far. I am debating going to a GenII, but reallllly love the new crossplane R1's. we will see what this summer brings!

GenII's are nice, R1's are even sweeter. I sold my 01' a while back and picked up and restored a 97' YZF1000R. It's a one year only sweetheart of a ride. Keep up the good work!
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Assuming you weighed it with yourself, and fuel in the tank, that would fall right around what I said, I'm sure you turbo setup is an extra 100 pounds too.

No.

3170 with me in it ( I am 170). Fuel was less than half tank, turbo setup is as heavy as a m90 is.

Fieros are heavy. It drives me crazy that everyone seems to think they are sub 2500lbs without issue.
 


Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Nice build!! This is one ive always wanted to do. Ive always loved fieros.
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Now that fieros are coming out as being fat little pigs, I no longer want to do one.
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

Now that fieros are coming out as being fat little pigs, I no longer want to do one.
I would have to say that is still a solid 500+ pounds less than any standard 3.8L platform, and you all are forgetting the biggest part MID ENGINE... loss of traction at launch? Whats that?
On another note, I have been doing some remodeling in the shop, and unable to do any work on the car recently, but today after work I helped a friend of mine install a new 3" turbo-back side pipe exhaust on his 04' SRT-4. It sounds really nice! and I am not a fan of neons or dodges for that matter..
Here is the car before.
BCC0C892-A7A6-4E3A-9B78-9A25E6B4EFAF-734-0000004B582B951C.jpg

D41ADB1E-1BC6-4EB4-8E92-DED0A78CF991-734-0000004B5B7BEC0C.jpg


The new exhaust
09942B08-F085-41AA-98E3-56AA7FF178FD-734-0000004B5DB64AAA.jpg

Installed
BA269B81-4761-4F9D-85D7-2AC488E68020-734-0000004B609BAF97.jpg

Then of course a fly-by video!
 
Re: Build Thread: The Fiero from Hell! Last update 1/26/2013

That's super rice. Now it just has nothing filling the bumper?
 
Back
Top