• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Bronzestone Metallic 2007 Grand Prix S/C



Ok here's my new suspension

KYB Excel G GR-2S
B&G sport springs
As you can see the front bellows are shot but I just ordered new ones. Shafts look new on all 4

I would clean them up but who cares can see them anyways









Also forgot to mention it came with tranny and engine spacers which are nearly .5in
 




Well Mister, I painted my SPOs but didn't tint the reverse bar or tails ....car looks good.
Gonna be sweet lowered.
 


I finally got around to doing the reverse light w/ VHT

Supplies costed about 40 bucks so here is the pictures :


First coat



3 coats dry

Applying Clear coat

Entire can of clear used





After buffing waxing and installing sorry about the rain

W/ LED reverse lights on


It did not come out very good it looks good from far but far from good. . . When I was applying the VHT the light rolled over on it self and cracked all the applied product so I am picking up a new light from the JY and will probably sell this one. I just do not feel like sanding it all the way down and starting over. It is good enough for now and looks fine.
 
Vht comes off real easy, when I redid mine I just wetsanded with 100 grit or so to strip most. Then went to finer grit to smooth it all out. No more than 15 mins with a strong palm.
 
N duplicator clear sucks, I've never had good luck with it lol. I been using automotivetouchup.com paint for my lip, spoiler, rails and they're clear is amazing. It goes on real glossy. N then when you compound n polish it , it helps even more. A little more expensive n gotta pay for shipping. But I try to just order at least 2 of each at a time so I always have it.
 
You must log in or register to reply here.
Back
Top