• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Brake Caliper to Hub bolt

GPGT4dr

GPGT4dr

New member
Lost ours going down the highway and nearly cracked our rim when the caliper lodged into the wheel going down the highway. Does anyone know what the thread pitch/length is so I can get my wifes car running? Thanks in advance!!
 


Can't you pull the other one out or one off the other side and take it to a hardware store and match it up?
 
I could but I don't want to take anything else off as it's wetter than hell here. Trying to avoid getting soaked again since last nights 5 hours in the freezing rain got me sick.
 


11610485 is the GM part #, and it's a M14 x 2 x 41 for anyone else looking. Thanks for the help y'all!
 
Thanks for the part # but why not just go to a yard and pull one off (i was told by three dealers here its a dealer only part but it was discontinued and they can't get it (I don't believe that bull but needed my car running so I took a trip to the yard)
 
I only knew because when doing an F body upgrade on my car (before I had the car technically) I didn't want to use sleeves. I wanted to use the larger W body bolt. Read a couple of posts and drilled/tapped them. An M14 x 2.00 tap isn't common.
 
I had a "mechanic" replace a missing caliper bracket mounting bolt with something from a hardware store. Last night it fell out on the highway. Use an OEM bolt from either a dealer or a junkyard. As you know it's not your typical bolt.
 


You must log in or register to reply here.
Back
Top