• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

BLUEGTP91's BUILD...Page 25 has some vids :D





Re: BLUEGTP91's BUILD!! *PICS Pg:7*

awesome. ive been thinking about it with the bullit shafts or whatever but i think just the street/strip one will get the job done.
 
Re: BLUEGTP91's BUILD!! *PICS Pg:7*

As long as you don't on running slicks with some stupid high stall you'll be just fine :D
 
Re: BLUEGTP91's BUILD!! *PICS Pg:7*

sounds good.

figured i would just get his trans and not have to worry about ****ing with it again.
 
Re: BLUEGTP91's BUILD!! *PICS Pg:7*

That's pretty much what I did. One thing I've never had an issue with is the transmission...although I did change out the filter and put a shift kit in it with Dexron VI a few months after I bought the car but that was it...bone stock putting down 1.8 60's and running high 13's on a 3.5", PEM's, DP, DHP, CAI, and 1.84 Rollers
 
Re: BLUEGTP91's BUILD!! *PICS Pg:7*

bluegtp91 said:
I get in it and let out of it after the 2nd gear skeet :th_thumbsup-wink:

YouTube - Modded GTP 20 Roll
Click to expand...


Nice. Your car pulls pretty hard. I found lulz after viewing your other videos.

hell yea! nice ride man. i got a gtp myself. i had a 2.8" supercharger pulley, intercooled but the core of the cooler cracked like a week after i put it in. im guessin it was a bad core or that it was a zzp core. i had to go back to my 3.2 pulley after that. i got that, a comp cam, headers, ported heads, and a 88cc throttle body. its quick! but i like what you did to yours bro!
Click to expand...

I'm guessing your pb on KCPMC was with the cam...did you have the trans then?
 


Re: BLUEGTP91's BUILD!! *PICS Pg:7*

realdiehl said:
Nice. Your car pulls pretty hard. I found lulz after viewing your other videos.



I'm guessing your pb on KCPMC was with the cam...did you have the trans then?
Click to expand...

Right...but that PB was with just a 3.4" and a ported TB, headers, cam, ported blower, with street tires and pump 91. Probably could have gone faster with a bigger TB, smaller pulley, and a retune with race gas and DR's...I'm guessing high 12's with that XP setup.
 
Re: BLUEGTP91's BUILD!! *PICS Pg:7*

bluegtp91 said:
Right...but that PB was with just a 3.4" and a ported TB, headers, cam, ported blower, with street tires and pump 91. Probably could have gone faster with a bigger TB, smaller pulley, and a retune with race gas and DR's...I'm guessing high 12's with that XP setup.
Click to expand...


As much as I've bull**** bickered with you, your car is cleaner than hell and definitely a performer. I'm sure you'll keep us updated with how this build turns out. :th_thumbsup-wink:
 
Re: BLUEGTP91's BUILD!! *PICS Pg:7*

realdiehl said:
As much as I've bull**** bickered with you, your car is cleaner than hell and definitely a performer. I'm sure you'll keep us updated with how this build turns out. :th_thumbsup-wink:
Click to expand...

Well, you've got my old rims...so your car is almost as bad :th_nanana:
 
Re: BLUEGTP91's BUILD!! *PICS Pg:7*

blowfishRus6 said:
whats left to get it going, is it going to be rolling soon??
Click to expand...

Well...basically all the small tedious sh!t...reassembly of the short block, torquin everything to spec...and then dropping it in and tuning it...I'm guessing it'll be running before the end of March...but you know how my schedule goes :th_laugh-lol2:
 


You must log in or register to reply here.
Back
Top