• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

blower motor relay???

bps02gtp

bps02gtp

New member
Does anyone know where these are? I've replaced my blower motor resistor, and tapped on the motor but I still get no fan from any of the speeds. Really don't wanna replace the blower motor. Also what's the best way to make sure I'm getting power to it? Is it supplied from the resistor? Please let me know guys. Thanks
 


bps02gtp said:
Does anyone know where these are? I've replaced my blower motor resistor, and tapped on the motor but I still get no fan from any of the speeds. Really don't wanna replace the blower motor. Also what's the best way to make sure I'm getting power to it? Is it supplied from the resistor? Please let me know guys. Thanks
Click to expand...


i am having the same issue in my gtp. the dealership i bought my car from told me that its the resistor that is causing the issue. i am just waiting on the resister to come in and im gonna replace it and go from there.
 
Yeah screen name says it all. 02 gtp. 98,200 miles. Isn't the power for the blower motor being supplied from the resistor tho? So all I would have to do is unplug the plug from resistor to blower and touch the terminals on the inside right?
 
unless there is a short somewhere. It would at least tell you if your blower is bad or not. Unplug it and run one wire to pos the other to neg and it should run.
 


Reason I asked is I recently pulled a schematic for an 02 for myself. As I have 3 and 4 only working. Ok. so 1 and 2 are probably the resistor and 5...well good ole 5 shows it going to a seperate power source and I've checked the fuse to be good. So I'll be looking at that schematic again..
 
Wouldn't 3 and 4 be on the resistor too? Do u see relays on there? There's gotta be one somewhere other than where the common places are.
 
The red and black wire from the resistor going to the blower is what supplies the power right? Jw so I can test and see if I have power
 
You must log in or register to reply here.
Back
Top