• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Are 2002 Nissan altima rims a direct fit?



bolt pattern is 114.3 but hub bore is 66.1. GPs have a bigger bore at 70.3 so maybe with some machining theyd work, but not a true bolt on
 
i'm assuming you guys are talkibg about the very center of the wheel where there is a hole. I don't know how much work it would be with these rims but on my old camaro i put on 5 spoke RS rims in place of the salad shooters and we had to use a diamond drill to bore out the center just a tad.
 


Oh ok thanks bio. So the method 4thgen suggested is the best? I found some other rims with a hub bore of 67.1 also
 


I have seen these before

1266891193.jpg
 
look how far they stick out because they have the wrong hub bore and i bet they are using spacers. it's so easy to open up the hub bore.
 
Bio248 said:
look how far they stick out because they have the wrong hub bore and i bet they are using spacers. it's so easy to open up the hub bore.
Click to expand...

yeah, they already have a +35 offset.
I had some 350Z wheels on my s10.

You need atleast a 10mm spacer them to clear the hubs or ofcourse bore out the hub bore..

There sweet rims. I love them
 
RidinONChrome: The oem bore of grand prix is 70.3 ?
I just bought rims with 73.1mm .. will i need big hubcentric rings?
 
only if the car shakes at speed will you NEED them. a lot of people get away with not using them considering most aftermarket wheels are 73mm bore.
 


You must log in or register to reply here.
Back
Top