• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Anyone got a write up one Power Steering pressure hose



You'll probably have to lower the back of the subframe a little bit to get in there very good but a 18mm line wrench should be all you need.
 
I can't remember which one is the pressure line, but when I did my rack I was able to reach down from the top of the motor and get the top line loose, and then once it was out of the way I went up from the bottom and got the other one. Lowering the subframe would have helped but I got it w/o doing that. If I did it over, I would lower the frame, lol...
 
yea, the pressure line feeds into the bottom of the PS pump. You MAY be able to get to the rack side of the line without lowering the subframe, but I dunno, it's pretty tight!
 
The pump side can be reached by removing the pass. tire and going through the wheelwell, I do remember that part for sure.
 
You must log in or register to reply here.
Back
Top