• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Aeroforce??



to the OP, i got that 3 wire connector and removed the jumper and put the red wire to the switched 12V that my other guages are on and now it works great.
 
Nice :th_thumbsup-wink: It was a huge relief for me when it started working, I thought I screwed up a 250 gauge before i even seen it work lol
 
quadracer960 said:
If you have an android phone, or iphone, sell the aeroforce, n buy the torque app for $2 or whatever the amount is, and buy a $35 obd2 port bluetooth adapter and there is your $37 scan gauge.
Click to expand...

I can't get Torque to show data for KR. Any hints?
 


Re: Aeroforce?? Help!!!!!

My aeroforce is doing the same thing. It worked fine a couple weeks ago when I tested it in the cigarette lighter. I get my pod I wire it up and it turns on, shows to parameters with no readings then powers off. I can go in the menu and it will stay on, as Soon as I hit scan, it shuts off. I hit either of the two buttons, it's just red.. Help!!
 
IIRC i connected the middle wire to key on power coming out of my sterio. I have a 96 monte. never had a prob
 
I have it tapped into the sunroof which is 20amp also. Power is not a problem like I said I can have it in the menu screen forever.. As Aston as I hit scan it shuts off. I tore it apart ounce again and noticed a wire is only holding on bye the casing. It's the black wire on bottom plug, with 8 ports. Which is the one that goes tithe obd2 port I believe. I don't know how to upload a pic from my iPhone on here. Or I would show you guys. Ima try and sauter it.
 


You must log in or register to reply here.
Back
Top