• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Abs/traction control sensor

mrlogic1234

mrlogic1234

New member
My abs/service traction control lights just started coming on last night, and what I've noticed is after I restart the car, it only comes on after I start moving. My question is does that rule out a bad connection/broken wire?

Sent from my Galaxy Note 3
 


I replaced my wheel bearings and it still had the problem. I found out it was a bad ebcm (electronic brake control module). 1100 from GM. So i went onto cheapabs.com and paid 100 to have it fixed plus the shipping there and back and works like new!
 
Ok so I found that the wire is broken right at the hub. So does that mean it's a lost cause? I was thinking about saudering in a new wire right there but I'm concerned that it won't hold. This hub was replaced under warranty by GM about a year ago, and it looks like the tech didn't secure the connector or it came loose from the little metal bracket that holds it to the hub. A new hub is $162. What do you guys think?

Sent from my Galaxy Note 3
 


I'm thinking I might just bite the bullet and get a timken hub with the warranty, and when the pass side goes bad I will just take it up there for a warranty replacement.

Sent from my Galaxy Note 3
 
Good to know about the cheapabs.com. I'm learning about sensors but if it comes to a module or the ecm,pcm whatever I'm going to be lost lol
 
You must log in or register to reply here.
Back
Top