• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

$700 Racebonne

Re: $700 Bonne SSEI Project

lawl that stuff works on leather? I use that **** on the carpet all the time
 


Tuff stuff and a toothbrush..I would even go as far as pulling the seat and cleaning them outside of the car thoroughly.
 
And pressure wash the carpet...clean the door panels and it should come our pretty good and at least get a bunch of the smell out.
 
Re: $700 Bonne SSEI Project

update:

737527_4722527379441_1688167618_o_zpsb97256e5.jpg

737650_4722528499469_1293333256_o_zps71f6804d.jpg

741148_4722526659423_1694750218_o_zps2da4629e.jpg


ugh, its getting there
 


Re: $700 Bonne SSEI Project

Nickell said:
I have no idea how to get that "stuff" off the seats. the previous owner was a smoker and its like some sort of smokers crap
Click to expand...
Magic erasers work wonders on leather with some all purpose cleaner, just be sure to condition them afterwards. Nice project by the way.
 
Re: $700 Bonne SSEI Project

I wasn't kidding when I said like purple power and a green 3M scrubby and brush 2 probably for the hard to reach areas. use it full strength and scrubb the ever livin turpentine out of it. rinse it really good with water, to get rid of any kind of stickiness. Let it sit for a day/2 to dry and then treat and re-treat with some leather goop.
 


Well...it's a Bonne afterall.

Swap out the marshmellow with hockey pucks. Get the MSD's off there when you can, they tend to fail at high rpm within a year.

Now...here's the challenge. I dare you do swap the front valve cover gasket. You'll fall in love quicker than you think. And your rear shocks are beyond easy to swap out.
 


what do you mean about the front VC gasket? and I picked up both new rear air shocks. seem simple enough, 3 bolts and 1 air connection.
 
Open the hood and look at what it would take to replace the VC gasket on the bonne, then walk over to the giant trash pile and look at that one.

Soon you'll be talking about how great the Bonne koolaid is... lol
 
BillBoost37 said:
Open the hood and look at what it would take to replace the VC gasket on the bonne, then walk over to the giant trash pile and look at that one.

Soon you'll be talking about how great the Bonne koolaid is... lol
Click to expand...

ah yes, I seen that the coil pack assembly isn't covering the VC like on the blue car, that is nice
 
You must log in or register to reply here.
Back
Top