2004 CompG - Thought I could delete all my posts; Nothing was ever wrong with the car
- Thread starter SpeedGrid
- Start date
Slick2500
New member
Re: My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
http://www.youtube.com/watch?v=slmnKFGlaro
http://www.amazon.com/Moog-RK80539-...RDO/ref=dp_top_cm_cr_acr_txt?showViewpoints=1
Its the same guy.
My bolts are installed right. I am still yet to find any information on if they are indeed made by Moog or not.
http://www.youtube.com/watch?v=slmnKFGlaro
http://www.amazon.com/Moog-RK80539-...RDO/ref=dp_top_cm_cr_acr_txt?showViewpoints=1
Its the same guy.
My bolts are installed right. I am still yet to find any information on if they are indeed made by Moog or not.
REDCRAPGP
New member
My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
Yup one bad review. Let's not act like defective parts don't exist but He's the dumbass for not noticing that the bolt was upside down. Had he it would of been a simple swap. Won't discourage me from getting the RK series.
Yup one bad review. Let's not act like defective parts don't exist but He's the dumbass for not noticing that the bolt was upside down. Had he it would of been a simple swap. Won't discourage me from getting the RK series.
Re: My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
Looks like the guy did just get a defective part.
Looks like the guy did just get a defective part.
Last edited:
Scottydoggs
Killa Bee
Re: My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
they will fit.
as far as sway bar end links that depends on what bar you have, links to the strut or links to the lca's.
if yours are on the strut you have to change the sway bar to make them work off the lca's.
they will fit.
as far as sway bar end links that depends on what bar you have, links to the strut or links to the lca's.
if yours are on the strut you have to change the sway bar to make them work off the lca's.
Re: My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
Hello,I see this was started back abt 2 yrs ago but being new here i see this thread now. No one has commented on your rims . You mentioned in the first post that you polished them...They look like they were chromed...what did you use and did you use a drill with a buffing wheel? Those are stock GT rims? My rims looks the same but they're nowhere near as shiny...
Hello,I see this was started back abt 2 yrs ago but being new here i see this thread now. No one has commented on your rims . You mentioned in the first post that you polished them...They look like they were chromed...what did you use and did you use a drill with a buffing wheel? Those are stock GT rims? My rims looks the same but they're nowhere near as shiny...
dsmuts
Moderator
Re: My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
Nope unless you swap sway bar
Nope unless you swap sway bar
Re: My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
Alright so since my car is clunking away lately I have decided to do a nearly full revamp of the suspension. The only think not getting changed are the struts as they are still working fine. What I plan on changing are my control arms, trailing arm's, tie rod ends, and both front and rear sway bar links. All parts below are Moog. Installation will have to wait until I go upstate for the summer as my uncle will have his mechanics at the dealership install them for free. I wont have a shop do it as the labor alone will cost more than all of the parts I order combined. I will likely place the order in a month or two before I head upstate. The total comes under $280 with free shipping.
Here is a screenshot of what I got along with the links to the parts so you can check them out yourself and tell me what you think.
Tie Rod Ends- http://www.ebay.com/itm/181312449057
Trailing Arms- http://www.ebay.com/itm/181373072051
Rear Sway Bar Link- http://www.ebay.com/itm/131156236804
Front Sway Bar Link- http://www.ebay.com/itm/130467772131
Control Arms Right and Left
http://www.ebay.com/itm/251314820255
http://www.ebay.com/itm/251314820220
Alright so since my car is clunking away lately I have decided to do a nearly full revamp of the suspension. The only think not getting changed are the struts as they are still working fine. What I plan on changing are my control arms, trailing arm's, tie rod ends, and both front and rear sway bar links. All parts below are Moog. Installation will have to wait until I go upstate for the summer as my uncle will have his mechanics at the dealership install them for free. I wont have a shop do it as the labor alone will cost more than all of the parts I order combined. I will likely place the order in a month or two before I head upstate. The total comes under $280 with free shipping.
Here is a screenshot of what I got along with the links to the parts so you can check them out yourself and tell me what you think.
Tie Rod Ends- http://www.ebay.com/itm/181312449057
Trailing Arms- http://www.ebay.com/itm/181373072051
Rear Sway Bar Link- http://www.ebay.com/itm/131156236804
Front Sway Bar Link- http://www.ebay.com/itm/130467772131
Control Arms Right and Left
http://www.ebay.com/itm/251314820255
http://www.ebay.com/itm/251314820220
Re: My 2004 Grand Prix Comp G (Suspension Revamp Arriving Eventually)
Okay so I plan on going to add sway bar bushings as well, since I have the Comp G with FE3 suspension, what size bushings do I need?
Moog has three types, .80", 1.18", and another for 1.34" suspension.
Okay so I plan on going to add sway bar bushings as well, since I have the Comp G with FE3 suspension, what size bushings do I need?
Moog has three types, .80", 1.18", and another for 1.34" suspension.
Last edited: