• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2004 COMP G Pully?

M

metal3753

New member
I want to pully my o4 comp g and i already have a CAI a down pipe and colder tstat in about a week i am getting some headers and colder plugs. How small of a pully can i run or whast else do i need to get to run a smaller pully?
 


One of the guys I work with has a friend who tunes alot of the gtp's around my town from what they tell me. they said with a tune, headers, cai, 160 tstat, colder plugs i can run a 3.2 pully. I have herd online that with my motor i need to cam or intercool to drop below a 3.6 or i will get knock. Also i swaped a motor for a friend in the same car and his motor had a series 2 stamp on the block so im guessing my motor also has it because there the same excat car so my question is why do it say series 2 on the block and series 3 on the cover for the motor?
 
You have a series 3 in your comp g but a 3.2 will chip a piston very quickly. The blocks are the same gm was lazy and didn't want to stamp series 3 on the block.
 


A 3.2 wont happen w/o a cam or intercooler or both and of course you'll more than likely have to upgrade to bigger fuel injectors. You'll probably be able to drop until a 3.6 if your not knocking and get a good tune and you should be happy.
 
Fivefingerdeathpunch said:
Scan first, then pulley drop.

A 3.6 is as far as you can really go on a basic pulley drop tune.
Click to expand...

Did anyone other than me laugh at the contradiction in this post? You just stated that one should scan first before dropping pulleys. Then stated a a certain pulley size for a "basic pulley drop tune." However if one scans an individual may very well be able to drop past a 3.6 on a "basic pulley drop tune." *Insert Monocule smilie*

metal3753 said:
One of the guys I work with has a friend who tunes alot of the gtp's around my town from what they tell me. they said with a tune, headers, cai, 160 tstat, colder plugs i can run a 3.2 pully. I have herd online that with my motor i need to cam or intercool to drop below a 3.6 or i will get knock. Also i swaped a motor for a friend in the same car and his motor had a series 2 stamp on the block so im guessing my motor also has it because there the same excat car so my question is why do it say series 2 on the block and series 3 on the cover for the motor?
Click to expand...
Cam or intercooler to go below 3.6. What? Where exactly did you read that?

metal3753 said:
How big of a difference will a 3.6 and headers make?
Click to expand...
Any drop in pulley size will net an increase in the butt dyno.
 


You must log in or register to reply here.
Back
Top